Compressed Air Requirements are:
Dry, Clean air
with no oil or lubrication
Anver Vacuum Pumps used on these Lifters have no moving parts
to be Festooned (hung in loops on overhead
crane) to the Lifter |
Compressed Air Requirements:
Vacuum
Station
Number |
Standard
Venturi
Generator
Used |
Compressed
Air
Consumption
SCFM
(l/min.) |
Supply
Pressure
Required
psi |
Max. Rated
Vacuum
in. Hg
(mm Hg) |
| MYT-1-09 |
VR09 |
1.27
(36) |
72.5 |
26
(660) |
| AL101 |
72.5 |
| MTY-2-12 |
JE12H |
2.37
(67) |
72.5 |
26
(660) |
| AL1001/12 |
| MTY-2-15 |
JE15H |
3.53
(100) |
72.5 |
26
(660) |
| AL1001/15 |
| MTY-2-20 |
JE20H |
6.36
(180) |
72.5 |
26
(660) |
| AL1001/20 |
| MTY-2-25 |
JE25H |
9.53
(270) |
72.5 |
26
(660) |
| AL1001/25 |
| AL1001/30 |
JE30H |
14.12
(400) |
72.5 |
26
(660) |
| APF-57/20 |
JE20H1 |
6.36
(180) |
75 |
26
(660) |
| APF-57/25 |
JE25H1 |
9.53
(270) |
75 |
26
(660) |
| APF-57/30 |
JE30H |
14.12
(400) |
75 |
26
(660) |
Note: Al generators are supplied with incoming air supply
shut-off slide valve in addition to the control valve(s). |
|
|
|
|
These are the main items to keep in mind: |
Capacity and
Number of Cups |
- Go through the proper lifting procedures shown in your manual or the latest ANSI guidelines with your operators and you are done. The lifters come fully assembled and tested. It is that simple!
- Make sure you have selected a Vacuum Lifter with adequate capacity to lift your heaviest load, and enough vacuum cups to support your longest, widest and thinnest load.
Click here for the chart for how we calculate this.
|
Crane - Lifter
= Working Capacity |
- Make sure your lifting hoist and crane have adequate capacity. Remember you need to deduct the Vacuum Lifter weight from the hoist and crane to get your overall capacity.
|
Headroom for
Lifter and Load |
- Check you have adequate headroom in your application for the Lifter and the Load.
- If you are working at high altitude,
make sure that you factor in loss of vacuum and pressure capacity
|
|
|
Spare Seals |
And lastly:
- Have you ordered key spare parts such as vacuum cups or seals? While they do last, this will probably be the first item needing service.
|
